Gamut Wireless Battery-Powered 2-Camera CCTV System, 1TB NVR
Camera Features
- Battery-Powered CCTV
- Whereas most wireless CCTV kits still need to be wired to a power supply, this kit uses rechargeable batteries for a truly wire-free solution. No need to run cables through walls!
- 1080p HD Video
- Each camera captures highly detailed 1080p Full HD video
- PIR Sensor
- Built-in detector picks up movement from a subject's body heat, triggering recording. This low power mode not only helps improve battery life but is far more accurate than standard motion detection
- Night Vision
- Infrared LEDs provide up to 8m of illumination, allowing 24/7 monitoring even in completely unlit areas
- Wide Angle Lens
- 2.8mm lens captures everything in a huge 120-degree field of view in front of the camera
- Two-Way Audio
- In addition to a microphone, the camera also features a speaker, letting you talk back to nearby subjects through your mobile device. Great for doors and entranceways
- IP66-Rated
- The camera is housed in a durable casing, allowing outdoor installation
- Quick Battery Access
- When the battery needs to be changed, you can easily swap it out without having to take the camera down from the wall. A small screw helps keep it secure when in use
- Long Standby Time
- Low Power PIR mode allows the camera to sit on standby waiting to be triggered for up to 6 months on a single charge
Recorder Features
- Wireless Recorder
- Connects to cameras from up to 50m away in clear line of sight. Please note: the range can be significantly impacted by obstructions such as walls, and the effective operating range can vary from 25 to 50 metres.
- 6 Channels
- The system can easily be expanded with up to 2 additional cameras
- 1TB HDD
- We've included a preinstalled 1TB hard drive to store footage, able to hold several weeks' worth of recordings
- HDMI Output
- Easily connect the recorder to a standard HD TV or screen in order to monitor your cameras in full resolution
- Discreet Design
- Unlike most bulky CCTV DVRs, this recorder's slimline, upright design means it won't attract attention and can easily be mistaken for a router
- Remote Access
- Connects to your network router, allowing you to easily view and control images from your PC or mobile device
Not sure where to start with network features? Don't worry - our remote setup service can get the kit configured for remote access for you. Just check the dropdown menu at the top of the page for more details!
What's in the box?
- 2x Battery-powered wireless CCTV cameras
- 2x Wall plates
- 1x USB charging cable
- 1x USB plug attachment
- 1x Wireless recorder
- 1x Mains supply for recorder
- 1x USB mouse
- Quickstart & software guide
Wireless CCTV is one of the simplest ways of setting up a security system to protect your home, as you don't need to run cables from the recorder to the cameras. One thing that often catches people out, however, is that wireless CCTV still needs to connect to a power supply, so you're still usually left having to run cables through a wall or window. This innovative new Gamut battery-powered CCTV system is designed to solve this. The cameras use Lithium-Ion batteries, allowing a completely wire-free installation.
Each camera is fitted with a PIR sensor, so it can detect a moving subject's body heat in order to trigger recording. Passive Infrared means the camera uses very little power when it's "asleep". This helps save battery power in between use, allowing up to 6 months' monitoring on a single charge. Do note: the camera will only record when triggered, and it can perform up to 12 hours of recorded footage in total. So on one battery charge, it can record in total for about 12 hours split over however many motion events that takes. For example, if the camera is recording 10 seconds of movement each time it is triggered, you could get, approximately, up to 7000 recordings from one battery.
Video is recorded in sharp, detail-packed 1080p, with 8m of night vision. It's even got a built-in speaker, allowing you to talk back to subjects through your mobile device.
Also included in the kit is a wireless recorder with a preinstalled 1TB HDD to store footage. The recorder connects to up to 6 cameras at a time, allowing you to expand the kit with up to two additional cameras at a later date. Connecting to your router lets you configure remote access, allowing you to view and control your cameras from a PC or mobile device.
Please note: As with all wireless transmissions, the range of the camera will vary depending on the layout and materials used in the building. Obstructions such as walls and windows between the camera and receiver will affect the wireless signal. The range can be significantly impacted by obstructions such as walls, and the effective operating range varies from 25 to 50 metres.
Camera
Effective Resolution: 1920x1080
Synch: Internal
Sensitivity: 0.05 lux @f/1.2 (IR off) 0 lux (IR on)
White Balance: Auto
AES Speed: Auto
AGC: Auto
Noise Reduction: 3D
Audio: Two-way audio
Lens: 2.8mm f/1.8
Viewing Angle: 120 degrees (horizontal)
Protection Level: IP66
IR Range: 8 metres
PIR Angle: 115 degrees
PIR Detection Range: 10 metres
Battery Capacity: 8700mAh
Battery Life Cycle: Up to 350(t)
Power Input: 4.2V
Power Consumption: 1.8W
Current Consumption: 420mA (active), 400µA (standby)
Operational Temperature: -30 to +55c
Operational Humidity: <95%
Dimensions: 136x73x89mm
Recorder
Channels: 6Output: HDMI
USB: 3x USB2.0
Video Output Resolution: 1920x1080 1440x900 1280x1024 1280x720 1024x768
Live View Channels: 1/4/6
Live View Frame Rate: Up to 60fps @ 1080p
Recording Trigger: Manual
Playback Channels: 1/4/6
Playback Speed: Variable max 2x
Search: Time/date, MD
Storage: 1TB (SATA)
Backup: USB flash HDD network
Backup File Format: MP4 AVI H.264
Remote Access: iOS, Android
Protocol: HTTP IPv4 TCP/IP UPNP RTSP UDP SMTP NTP DHCP DNS PPPOE DDNS FTP
Network Interface: 10/100M RJ45
Network Bitrate: Max 32Mbps
Power Consumption: 3W (No HDD)
Power Input: 12V 2A
Operational Temperature: -10 to +55c
Operational Humidity: 10-90%
